This file documents Dselect for first-time users and is intended to help in getting Debian installed successfully. It makes no attempt to explain everything, so when you first meet dselect work through the help screens.
Dselect is used to select just which packages (from ~800) you wish to install. It will be run for you during the install and as it is a very powerful and somewhat complex thing, some knowledge of it before hand will not go astray. It will step you through the package installation process as follows:
Choose the access method to use.
Update list of available packages, if possible.
Request which packages you want on your system.
Install and upgrade wanted packages.
Configure any packages that are unconfigured.
Remove unwanted software.
As each step is completed successfully it will lead you on to the next.
Go through them in order without skipping any steps.
Here and there in this document we talk of starting another shell. Linux has 6 console sessions or shells available at any one time. You switch betwen them by hitting <LEFT-ALT> <F1> ... <F6>, after which you log in on your new shell and go ahead. The shell used by the install process is #1 so hit <LEFT-ALT> <F1>when you want to return to that process.
Once in dselect you will get this screen:-
0. [A]ccess Choose the access method to use. 1. [U]pdate Update list of available packages, if possible. 2 [S]elect Request which packages you want on your system. 3. [I]nstall Install and upgrade wanted packages. 4. [C]onfig Configure any packages that are unconfigured. 5. [R]emove Remove unwanted software. 6. [Q]uit Quit dselect.
Let's look at these one by one.
Here's the access screen:
Abbrev. Description cdrom Install from a CD-ROM. nfs Install from an NFS server (not yet mounted). harddisk Install from a hard disk partition (not yet mounted). mounted Install from a filesystem which is already mounted. floppy Install from a pile of floppy disks. ftp Install using ftp.
Here we tell dselect where our packages are. Note that the first three
items are just a convenience and it would be just as good if you mounted
your cdrom, nfs mount or other partition yourself and then used the _mounted_
option. It follows that if your cdrom _is_ already mounted then you use
the _mounted_ item, rather than the cdrom item. The same thing goes for
nfs and for partitions on your harddisk.
If you run into a problem here - maybe Linux can not see your cdrom, your nfs mount is not working or you have forgotten which partition the packages are on - you have a couple of options:-
After you choose the access method dselect will get you to indicate the
precise location of the packages. If you do not get this right the first
time hit ^C and return to the Access item.
Once you are through here you will be returned to the main screen.
Dselect will read the Packages or Packages.gz files from the mirror and create a database on your system of all available packages.
Hang on to your hat. This is where it all happens. The object of the excercise is to select just which packages you wish to have installed.
Hit <Enter>. If you have a slow machine be aware that the screen will clear and can remain blank for 15 seconds so don't start bashing keys at this point.
The first thing that comes up on the screen is page 1 of the Help file. You can get to this help by hitting ? at any point in the Select screens and you can page through the help screens by hitting the . (full stop) key.
Before you dive in note these points:
Let's look at the top two lines of the Select screen.
dselect - recursive package listing mark:+/=/- verbose:v help:? EIOM Pri Section Package Description
This tells us of some of the special keys:-
+ Select a package for installation.
= Place a package on hold - useful on a broken package. You can reinstall an older
version and place it on hold while you wait for a new one to appear.
- Remove a package _ remove a package and its config files.
i,I Toggle/cycle info displays.
o,O Cycle through the sort options.
v,V Is a terse/verbose toggle. Use this key to unlock the meanings of EIOM on line two,
but I'll give you a summary here anyway. (Note that upper and lower case keys are
quite different in effect.)
Flag Meaning Possible values
E Error Space, R, I
I Installed state Space, *, -, U, C, I
O Old mark *, -, =, _, n
M Mark *, -, =, _, n
Rather that spell all this out here I refer you to the Help screens where
all is revealed. One example though.
You enter dselect and find a line like this:-
EIOM Pri Section Package Description ** Opt misc loadlin a loader (running under DOS) for LINUX kernel
This is saying that loadlin was selected when you last ran dselect and
that it is still selected, but it is not installed. Why not? The answer
must be that the loadlin package is not physically avaiable. It is missing
from your mirror.
The information which dselect uses to get all the right packages installed is buried in the packages themselves. Nothing in this world is perfect and it does sometimes happen that the dependancies built into a package are incorrect, with the result that dselect simply cannot resolve the situation. A way out is provided where the user can regain control and it takes the form of the commands Q and X which are available in the Select screen.
Q An over-ride. Forces dselect to ignore the built in dependancies and to do what you have
specified. The results, of course, will be on your own head.
X Use X if you get totally lost. It puts things back the way they were and exits.
Keys which help you _not_ to get lost (!) are R, U and D.
R Cancels all selections at this level. Does not affect selections made
at the previous level.
U If dselect has proposed changes and you have made further changes U will
restore dselect's selections.
D Removes the selections made by dselect, leaving only yours.
An example:
The boot-floppies package depends on these packages:-
libc5-pic
ncurses3.0-pic
mkrboot
ncurses3.0-dev
The person maintaining boot-floppies also thinks that the following packages should be installed. These are not, however, essential:-
loadlin fdos dosemu So when I select boot-floppies I get this screen: dselect - recursive package listing mark: +/=/- verbose:v help:? EIOM Pri Section Package Description _* Opt devel boot-floppie Scripts to create the Debian installationfloppy _* Xtt devel libc5-pic Kit for building specialized versions of the sha _* Xtr devel ncurses3.0-p Video termial manipulation: Shared-library subs _* Opt devel mkrboot Make a kernel + rootimage bootable from one disk _* Opt devel ncurses3.0-d Video terminal manipulation: Developer's librari _* Opt misc loadlin a loader (running under DOS) for LINUX kernel i _* Opt misc fdos Free DOS (Kernel + boot utilities + Documentatio __ Opt misc dosemu The Linux DOS Emulator
See how all the required packages have been selected for me.
The R key puts things back to the starting point.
dselect - recursive package listing mark: +/=/- verbose:v help:? EIOM Pri Section Package Description __ Opt devel boot-floppie Scripts to create the Debian installationfloppy __ Xtt devel libc5-pic Kit for building specialized versions of the sha __ Xtr devel ncurses3.0-p Video termial manipulation: Shared-library subs __ Opt devel mkrboot Make a kernel + rootimage bootable from one disk __ Opt devel ncurses3.0-d Video terminal manipulation: Developer's librari __ Opt misc loadlin a loader (running under DOS) for LINUX kernel i __ Opt misc fdos Free DOS (Kernel + boot utilities + Documentatio __ Opt misc dosemu The Linux DOS Emulator
(If I decide now that I don't want boot-floppies I just hit <Enter>.)
The D key puts things the way I selected them in the first place.
dselect - recursive package listing mark: +/=/- verbose:v help:? EIOM Pri Section Package Description _* Opt devel boot-floppie Scripts to create the Debian installation floppy __ Xtt devel libc5-pic Kit for building specialized versions of the sha __ Xtr devel ncurses3.0-p Video termial manipulation: Shared-library subs __ Opt devel mkrboot Make a kernel + rootimage bootable from one disk __ Opt devel ncurses3.0-d Video terminal manipulation: Developer's librari __ Opt misc loadlin a loader (running under DOS) for LINUX kernel __ Opt misc fdos Free DOS (Kernel + boot utilities + Documentatio __ Opt misc dosemu The Linux DOS Emulator
The U key restores dselect's selections.
dselect - recursive package listing mark: +/=/- verbose:v help:? EIOM Pri Section Package Description _* Opt devel boot-floppie Scripts to create the Debian installation floppy _* Xtt devel libc5-pic Kit for building specialized versions of the sha _* Xtr devel ncurses3.0-p Video termial manipulation: Shared-library subs _* Opt devel mkrboot Make a kernel + rootimage bootable from one disk _* Opt devel ncurses3.0-d Video terminal manipulation: Developer's librari _* Opt misc loadlin a loader (running under DOS) for LINUX kernel i _* Opt misc fdos Free DOS (Kernel + boot utilities + Documentatio __ Opt misc dosemu The Linux DOS Emulator
I suggest running with the defaults for now - you will have ample opportunity of adding more later. A possible exception which you may choose to deselect depending on your experience is:-
emacs (very big, not everyone wants it)
And I would suggest not installing:
inn (big, difficult to get going) x11 (big, difficult to get going)
Whatever you decide, hit <Enter> to accept and return to the main screen. If this results in unresolved problems you will be bounced right back to another problem resolution screen.
So the R, U and D keys are very useful in what_if situations. You can experiment at will and then restore everything and start again. Don't look on them as being in a glass box labelled Break In Emergency.
After making your selections in the Select screen, hit I to give you a big window, t to take you to the beginning and then use the page-down key to look quickly through the settings. This way you can check the results of your work and spot glaring errors. Some people have dselected whole groups of packages by mistake and not noticed the error until too late. Dselect is a _very_ powerful tool so don't misuse it.
You should now have this situation:-
package category status required all selected important all selected standard mostly selected optional mostly dselected extra mostly dselected
Happy? Hit <Enter> to exit the Select process. You can come back and run Select again if you wish.
Dselect runs through the entire 800 packages and installs those selected. Expect to get asked to make decisions as you go. It is often useful to switch to a different shell to compare, say, an old config with a new one. If the old file is conf.modules the new one will be conf.modules.dpkg-new.
The screen scrolls past fairly quickly on a new machine. You can stop/start it with ^S/^Q and at the end of the run you will get a list of any uninstalled packages. If you want to keep a record of everything that happens use normal Unix features like tee or script.
Most packages get configured in step 3, but anything left hanging can be configured here.
Removes packages that are installed but no longer required.
I suggest running /etc/cron.daily/find at this point as you have a lot of new files on your system. Then you can use locate to get the location of any given file.
When the install process runs dselect for you, you will doubtless be eager to get Debian running ASAP. Well, please be prepared to take an hour or so as you have to learn your way around and then get it right. When you enter the Select screen for the first time don't make ANY selections at all - just hit <Enter> and see what dependancy problems there are. Try fixing them. If you find yourself back at the main screen run Select again.
You can get an idea of the size of a package by hitting i twice and looking for the Size figure. This is the size of the crunched package, so the uncrunched files will be a lot bigger.
Installing a new Debian system is a very complex thing, but dselect can do it for you as easily as can be. So take the time to learn how to drive it. Read the help screens and experiment with i, I, o, and O. Use the R key. It's all there, but it's up to you to use it effectively.
Package
A file which contains everything needed to install, de-install and run
a particular program.
The program which handles packages is dpkg. Dselect is a front end to dpkg. Experienced users often use dpkg to install or remove a package.
Package names
All package names have the form xxxxxxxxxxx.deb
Sample package names are:
efax_08a-1.deb
lrzsz_0.12b-1.deb
mgetty_0.99.2-6.deb
minicom_1.75-1.deb
term_2.3.5-5.deb
uucp_1.06.1-2.deb
uutraf_1.1-1.deb
xringd_1.10-2.deb
xtel_3.1-2.deb